Full width home advertisement

Welcome Home


Post Page Advertisement [Top]

INDUSTRIAL SAFETY ENGINEERING FULL VIDEO TUTORIAL





AUTHOR / TUTOR

IIT Kharagpur - Industrial Safety Engineering by Prof J Maiti


VIDEO OUTLINE COURSE:

 
Lesson 1: Introduction to Industrial Safety Engineering

Lesson 2: Key concepts and terminologies

Lesson 3: Key concepts and terminologies-Safety domain ontology

Lesson 4: Key concepts and terminologies-Risk Assessment & Control
 
Lesson 5: Safety Engineering & Accident causing mechanisms

Lesson 6: Preliminary Hazard List

Lesson 7: Preliminary Hazard Analysis

Lesson 8: Hazard and operability study (HAZOP)

Lesson 09 : Failure Modes and Effects Analysis (FMEA)- Identification of Failure Modes

Lesson 10: Failure Modes and Effects Analysis (FMEA)-Continue

Lesson 11: Application of Hazard Identification Techniques

Lesson 12: FAULT TREE ANALYSIS (FTA)- Construction

Lesson 13: FAULT TREE ANALYSIS (FTA)- Gate by Gate method

Lesson 14: FAULT TREE ANALYSIS (FTA)- Cut-set method

Lesson 15: FAULT TREE ANALYSIS (FTA): Importance measures

Lesson 16: EVENT TREE ANALYSIS (ETA)

Lesson 17: BOWTIE TOOL

Lesson 18: Bow-tie: Common Cause Cut Sets

Lesson 19: Bow-tie: Cut-sets for Accident Scenarios

Lesson 20: Bow-tie: Cut-sets for Accident Scenarios (Cont.)

Lesson 21: Bow-tie: Safety Barriers Identification
 
Lesson 22: Risk Assessment

Lesson 23: Consequence Assessment
 
Lesson 24: Energy Control Model and Hazard Control Hierarchy

Lesson 25: Safety Function Deployment

Lesson 26: Ranking of Design Solutions: AHP approach

Lesson 27: Quantification of Basic Events for Non-repairable Components

Lesson 28: Quantification of Basic Events - Hazard Rate

Lesson 29: Quantification of Basic Events - Exponential Distribution

Lesson 30: Quantification of Basic Events - Weibull Distribution 

Lesson 31:Quantification of Basic Events: Failure to Repair Process

Lesson 33:Quantification of Basic Events: Failure & Repair Intensities

Lesson 34:Computation of combined process parameters: Laplace transform analysis
 
Lesson 35: Computation of combined process parameters: Markov Analysis

Lesson 32:Quantification of Basic Events: Combined Process
 
Lesson 36: Quantification of Systems Safety and Reliability Block Diagram

Lesson 37: Systems Safety Quantification: Truth Table Approach

Lesson 38: Systems Safety Quantification: Structure Function

Lesson 39: Systems Safety Quantification: Minimal Cut and Minimal Path Representation.

Lesson 40: Systems Safety Quantification: Tutorial

Lesson 41: Human Error, Classification and Causes

Lesson 42: Human Error, Classification and Causes (contd.)

Lesson 43: Human Error Identification

Lesson 44: Human Reliability Assessment

Lesson 45: Human Error Quantification from Experts’ opinions – Fuzzy Set Approach

Lesson 46: Accident Investigation

Lesson 47: Accident Investigation & Analysis: Descriptive Analytics

Lesson 48: Control Chart Analysis

Lesson 49: Accident Data Analysis: Regression

Lesson 50: Accident Data Analysis: Classification Tree
 
Lesson 51: Occupational Health & Safety Management Systems(OH&SMS) and OHSAS 18001-Part I

Lesson 52: Occupational Health & Safety Management Systems(OH&SMS) and OHSAS 18001-Part II

Lesson 53: Occupational Health & Safety Management Systems(OH&SMS) and OHSAS 18001-Part III

Lesson 54: "Safety Performance Indicators Part-I "

Lesson 55: "Safety Performance Indicators Part-I "
 
Lesson 56: Energy Isolations

Lesson 57: Virtual Reality- Introduction

Lesson 58: Geometry of virtual world

Lesson 59: VR roadmap – A case study

Lesson 60: Summary



Industrial Safety Engineering Quiz and Test



Industrial Safety Engineering Exams and Certification

No comments:

Post a Comment

Bottom Ad [Post Page]