Author:

# INDUSTRIAL SAFETY ENGINEERING FULL VIDEO TUTORIAL

## AUTHOR / TUTOR

IIT Kharagpur – Industrial Safety Engineering by Prof J Maiti

## VIDEO OUTLINE COURSE:

Lesson 1: Introduction to Industrial Safety Engineering
Lesson 2: Key concepts and terminologies
Lesson 3: Key concepts and terminologies-Safety domain ontology
Lesson 4: Key concepts and terminologies-Risk Assessment & Control

Lesson 5: Safety Engineering & Accident causing mechanisms
Lesson 6: Preliminary Hazard List
Lesson 7: Preliminary Hazard Analysis
Lesson 8: Hazard and operability study (HAZOP)
Lesson 09 : Failure Modes and Effects Analysis (FMEA)- Identification of Failure Modes
Lesson 10: Failure Modes and Effects Analysis (FMEA)-Continue
Lesson 11: Application of Hazard Identification Techniques
Lesson 12: FAULT TREE ANALYSIS (FTA)- Construction
Lesson 13: FAULT TREE ANALYSIS (FTA)- Gate by Gate method
Lesson 14: FAULT TREE ANALYSIS (FTA)- Cut-set method
Lesson 15: FAULT TREE ANALYSIS (FTA): Importance measures
Lesson 16: EVENT TREE ANALYSIS (ETA)
Lesson 17: BOWTIE TOOL
Lesson 18: Bow-tie: Common Cause Cut Sets
Lesson 19: Bow-tie: Cut-sets for Accident Scenarios
Lesson 20: Bow-tie: Cut-sets for Accident Scenarios (Cont.)
Lesson 21: Bow-tie: Safety Barriers Identification

Lesson 22: Risk Assessment
Lesson 23: Consequence Assessment

Lesson 24: Energy Control Model and Hazard Control Hierarchy
Lesson 25: Safety Function Deployment
Lesson 26: Ranking of Design Solutions: AHP approach
Lesson 27: Quantification of Basic Events for Non-repairable Components
Lesson 28: Quantification of Basic Events – Hazard Rate
Lesson 29: Quantification of Basic Events – Exponential Distribution
Lesson 30: Quantification of Basic Events – Weibull Distribution
Lesson 31:Quantification of Basic Events: Failure to Repair Process
Lesson 33:Quantification of Basic Events: Failure & Repair Intensities
Lesson 34:Computation of combined process parameters: Laplace transform analysis

Lesson 35: Computation of combined process parameters: Markov Analysis
Lesson 32:Quantification of Basic Events: Combined Process

Lesson 36: Quantification of Systems Safety and Reliability Block Diagram
Lesson 37: Systems Safety Quantification: Truth Table Approach
Lesson 38: Systems Safety Quantification: Structure Function
Lesson 39: Systems Safety Quantification: Minimal Cut and Minimal Path Representation.
Lesson 40: Systems Safety Quantification: Tutorial
Lesson 41: Human Error, Classification and Causes
Lesson 42: Human Error, Classification and Causes (contd.)
Lesson 43: Human Error Identification
Lesson 44: Human Reliability Assessment
Lesson 45: Human Error Quantification from Experts’ opinions – Fuzzy Set Approach
Lesson 46: Accident Investigation
Lesson 47: Accident Investigation & Analysis: Descriptive Analytics
Lesson 48: Control Chart Analysis
Lesson 49: Accident Data Analysis: Regression
Lesson 50: Accident Data Analysis: Classification Tree

Lesson 51: Occupational Health & Safety Management Systems(OH&SMS) and OHSAS 18001-Part I
Lesson 52: Occupational Health & Safety Management Systems(OH&SMS) and OHSAS 18001-Part II
Lesson 53: Occupational Health & Safety Management Systems(OH&SMS) and OHSAS 18001-Part III
Lesson 54: “Safety Performance Indicators Part-I “
Lesson 55: “Safety Performance Indicators Part-I “

Lesson 56: Energy Isolations
Lesson 57: Virtual Reality- Introduction
Lesson 58: Geometry of virtual world
Lesson 59: VR roadmap – A case study
Lesson 60: Summary